OBD / EOBD Accessories

OBD Accessories
Board voltage connector - Cigarette on banana plugs
38007
Board voltage connector - Cigarette on banana plugs
Cigarette lighter plug on two banana plugs (4mm); equipped with a fuse (5A); cable length about 1.5 m (5ft.); This cable can supply equipment with appropriate input voltage from the cigarette lighter.
9,99 €
6,66 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38007

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Board voltage connector - Cigarette on OBD-2 plug
32117
Board voltage connector - Cigarette on OBD-2 plug
Cigarette lighter plug to an OBD-2 / EOBD socket. Equipped with a microfuse (5A). The cable length is about 0.50m. With this cable you can supply devices (such as GPS trackers) with power from a 12V or 24V jack. The "nose" on the J1962 socket ensures a very secure hold of the connected device.
16,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32117

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A1 - 12V / 600mA
30067
Power-Supply for OBD2 - Interfaces - Typ A1 - 12V / 600mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 600 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
28,49 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A2 - 12V / 1000mA
30067-1000
Power-Supply for OBD2 - Interfaces - Typ A2 - 12V / 1000mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 1000 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
31,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067-1000

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A3 - 12V / 1500mA
30067-1500
Power-Supply for OBD2 - Interfaces - Typ A3 - 12V / 1500mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 1500 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
32,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067-1500

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A4 - 12V / 2000mA
30067-2000
Power-Supply for OBD2 - Interfaces - Typ A4 - 12V / 2000mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 2000 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
33,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067-2000

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D1 - 12V / 600mA
30066-600
Power-Supply for OBD2 - Interfaces - Typ D1 - 12V / 600mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 600 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
29,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-600

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D2 - 12V / 1000mA
30066-1000
Power-Supply for OBD2 - Interfaces - Typ D2 - 12V / 1000mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 1000 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
31,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-1000

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D3 - 12V / 1500mA
30066-1500
Power-Supply for OBD2 - Interfaces - Typ D3 - 12V / 1500mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 1500 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
32,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-1500

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D4 - 12V / 2000mA
30066-2000
Power-Supply for OBD2 - Interfaces - Typ D4 - 12V / 2000mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 2000 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
33,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-2000

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Show 1 to 10 (from a total of 10 products)