Main page » OBD Accessories » OBD BreakOuts

OBD / OBD-2 BreakOut Boxes and Cables

OBD BreakOuts

OBD BreakOut-Box F / Monitor-Box - OBD-2 (SAE J1962 Typ A)

32079

OBD BreakOut-Box F / Monitor-Box - OBD-2 (SAE J1962 Typ A)

Male OBD-2/EOBD (SAE J1962 type A) AND female OBD-2/EOBD (SAE J1962 type A) to Breakout Box, cable length about 0.5 m. Breakout function: With this box they have the possibility of accessing over the banana sockets by means of banana plugs on the pins of the OBD-II socket. Monitor function: The data between the OBD-II socket and an attached Messequipement (tester) can be along-logged over the banana sockets.

29,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32079

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Box G / Monitor-Box - OBD-2 (SAE J1962 Typ A + B)

38074

OBD BreakOut-Box G / Monitor-Box - OBD-2 (SAE J1962 Typ A + B)

Male OBD-2/EOBD (SAE J1962 type A+B) AND female OBD-2/EOBD (SAE J1962) to Breakout Box, cable length about 0.5 m. Breakout function: With this box they have the possibility of accessing over the banana sockets by means of banana plugs on the pins of the OBD-II socket. Monitor function: The data between the OBD-II socket and an attached Messequipement (tester) can be along-logged over the banana sockets.

49,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38074

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Box C - Mercedes Benz 38Pin

32028

OBD BreakOut-Box C - Mercedes Benz 38Pin

High quality OBD (Mercedes 38-pin) to Breakout Box, cable length about 1.5 m. Special breakout box which enables you to access all pins on a 38 pin Benz diagnostic connector via 4mm female banana sockets. Since Benz use a lot of different K-lines for it's different systems like engine ECU, ABS, etc. this is needed for most scantools if you want to access all the systems just by pluging the K-line into the right socket of the system.

49,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32028

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Box C - Cable for LT/Sprinter 14pin

32028-LT

OBD BreakOut-Box C - Cable for LT/Sprinter 14pin

With this cable you extend the "OBD BreakOut-Box C" (Article #32028) to the possibility of older VW LT's and Mercedes Sprinter to diagnose; cable length about 150cm; because the high quality to be used without any problems even in tough workshop.

14,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32028-LT

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable A - BMW Adapter to 4mm Banana jacks - (like Bosch KTS 1.684.463.465)

32038

OBD BreakOut-Cable A - BMW Adapter to 4mm Banana jacks - (like Bosch KTS 1.684.463.465)

OBD Breakout Cable for cars from BMW, transforms the normal diagnostic (OBD) plug to 7 banana sockets (4mm); fully compatible with the Bosch original part number 1 684 463 465 (KTS systems);

14,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32038

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable C1 - Opel Adapter to 4mm Banana jacks - (like Bosch KTS 1.684.463.464)

32041

OBD BreakOut-Cable C1 - Opel Adapter to 4mm Banana jacks - (like Bosch KTS 1.684.463.464)

OBD Breakout Cable for cars from Opel, transforms the normal diagnostic (OBD) plug to 3 banana sockets; fully compatible with the Bosch original part number 1 684 463 464 (KTS systems); K-Line, GND and VBAT to coloured 4mm banana sockets.

9,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32041

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable C2 - Opel Adapter to 4mm Banana jacks - (like Bosch KTS 1.684.463.464)

38066

OBD BreakOut-Cable C2 - Opel Adapter to 4mm Banana jacks - (like Bosch KTS 1.684.463.464)

OBD Breakout Cable for cars from Opel, transforms the normal diagnostic (OBD) plug to 3 banana sockets; fully compatible with the Bosch original part number 1 684 463 464 (KTS systems); K-Line, GND and VBAT to coloured 4mm banana sockets.

11,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38066

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable D - GM / Daewoo to Banana jacks - (like KTS 1.684.463.466)

38067

OBD BreakOut-Cable D - GM / Daewoo to Banana jacks - (like KTS 1.684.463.466)

OBD Breakout Cable for cars from GM / DAEWOO, transforms the normal diagnostic (OBD) plug to 6 banana sockets (4mm); fully compatible with the Bosch original part number 1 684 463 466 (KTS systems);

12,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38067

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable E - VAG to Banana jacks - (like KTS 1.684.463.467)

38071

OBD BreakOut-Cable E - VAG to Banana jacks - (like KTS 1.684.463.467)

OBD Breakout Cable for cars from VAG, transforms the normal diagnostic (OBD) plug to 4 banana sockets (4mm); fully compatible with the Bosch original part number 1 684 463 467 (KTS systems); Lenght of the Cable ca. 90cm (3ft.)

12,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38071

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable F1 - Fiat, Alfa Romeo, Lancia to 4mm banana sockets (KTS)

32036

OBD BreakOut-Cable F1 - Fiat, Alfa Romeo, Lancia to 4mm banana sockets (KTS)

OBD Breakout Cable for cars from Fiat, Lancia, Alfa Romeo etc., transforms the normal diagnostic (OBD) plug to 4 banana sockets; fully compatible with the Bosch original part number 1 684 463 394 (KTS systems);

9,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32036

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable F2 - Fiat, Alfa Romeo, Lancia to 4mm banana sockets (KTS)

38069

OBD BreakOut-Cable F2 - Fiat, Alfa Romeo, Lancia to 4mm banana sockets (KTS)

OBD Breakout Cable for cars from Fiat, Lancia, Alfa Romeo etc., transforms the normal diagnostic (OBD) plug to 4 banana sockets; fully compatible with the Bosch original part number 1 684 463 394 (KTS systems);

14,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38069

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD Adapter Cable universal - 4x banana plugs to OBD2 16pin (KTS)

38035

OBD Adapter Cable universal - 4x banana plugs to OBD2 16pin (KTS)

OBD-2 female coupling on four banana plugs. This adapter is function-identical to the Bosch "adapter cable Uni 4" (order number 1 684 463 539). The adapter is required for the various additional adapters from the KTS Diagnostic Tester (for example KTS 570/540/530). Cable length about 0.30m.

7,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38035

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable H - Peugeot to 4mm banana sockets

38070

OBD BreakOut-Cable H - Peugeot to 4mm banana sockets

OBD Breakout Cable for cars from Peugeot, transforms the normal diagnostic (OBD) plug to 4 banana sockets (4mm); Lenght of the Cable ca. 90cm (3ft.)

14,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38070

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable J - RENAULT to 4mm female banana sockets

38068

OBD BreakOut-Cable J - RENAULT to 4mm female banana sockets

OBD Breakout Cable for cars from Renault, transforms the normal diagnostic (OBD) plug to 7 banana sockets; Lenght of the Cable ca. 60cm (2ft.)

14,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38068

Shippingtime:

ca. 2-4 workdays (on stock)

ca. 2-4 workdays (on stock)

OBD BreakOut-Cable G - for all OBD-2 / EOBD compatible cars

32037

OBD BreakOut-Cable G - for all OBD-2 / EOBD compatible cars

OBD-2/EOBD (SAE J1962 Typ A+B) Breakout Cable, transforms a normal OBD plug to 4 banana sockets. K-Line, L-Line, GND and VBAT to coloured 4mm banana sockets.

9,99 €

incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32037

Shippingtime:

SOLD OUT

SOLD OUT

Show 1 to 15 (from a total of 15 products)