The
iCarsoft OP V1.0 for
OPEL und
Vauxhall characterized by high-quality hardware and easy and understandable operation. The control device data can be transmitted quickly and easily to the handset. If the device detects a fault or a fault in the communication, the user is informed of the system and receives further details. In addition to the support of the engine control unit, all control units installed in the passenger car are also relieved. Examples are the ABS, parking brake module, entertainment module, automatic transmission, airbag, air conditioning and some more.
Key Features |
- Can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc.
- Support OBDII/EOBD Ten Modes of Operation
- Read Live Data
- Full ECU Diagnosis
- Applies to the single Brand of all Models equipped with OBDII-16 DLC
- Easy To Use with Silicone Keys
- Service Resets: Support Oil-Service Reset.
- The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
- Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
- DTC Library to lookup when user is operating this tool.
- Upgrade via USB2.0
- Multi-language: English, German, Dutch, Spanish, French
|
OBDII functions |
- Read Codes
- Erase Codes
- I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
- Data Stream
- Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
- O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle ' s on-board computer.
- On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
- Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
- Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
- Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
- Turn off Check Engine Light (MIL), clear codes and reset monitors
- Read live PCM datastream
- Support CAN (Controller Area Network) and all other
- Multilingual menu and DTC definitions- English, Spanish, and German, etc
- Read pending DTCs
- Read permanent DTCs
- DTCs search
- Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
- Works on most of 2001 and later OBDII compliant PETROL European vehicles
- Works on most of 2004 and later OBDII compliant DIESEL European vehicles
- Works on most of 1996 and later OBDII compliant US and Asian vehicles
- View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
- Comprehensive Help, Including OBD Parameter, Mode Explanations & More.
|
Will my vehicle be supported?
Use the following function lists to check if if and how your vehicle is supported. Although some vehicles can be diagnosed, they may not support all types of service resets. Or some service resets are possible, but some or all diagnostic features are missing. Of course, the lists are not updated daily, so extensions are possible. In case of doubt, use the function "Ask about product" on the right side and we will try to clarify it.
|
Coverage Opel / Vauxhall |
- Agila
- Agila‐B
- Arena
- Astra‐F
- Astra‐G
- Astra‐G (GMSA)
- Astra‐H
- Astra‐J
- Calibra
- Campo
- Captiva (Short)
- Captiva (Long)
- Combo
- Corsa‐B
- Corsa‐B (GMSA)
- Corsa‐C
- Corsa‐C (GMSA)
- Corsa‐D
- Frontera
- Frontera‐B
- Insignia (2009-2013)
- Meriva
- Meriva‐B
- Monterey
- Movano
- Omega‐B
- Sintra
- Speedster/VX220
- Tigra
- Tirgra‐B
- Vauxhall Monaro
- Vectra‐B
- Vectra‐C/Signum
- Vivaro
- Zafira
- Zafira‐B
|
Example-Screens
|
|
(Options depend on the vehicle and the software version) |
Contents
|
iCarsoft OP V1.0 in ORANGE (**)
OBD II Cable
Micro SD Card with Software
High quality bag for safe keeping
USB Cable
Manual (German / English / Dutch) |