OBD-2 Extension Cable Q / 0.6m - (J1962 M-F) // flat angled connector with switch
OBD-2 / EOBD (SAE J1962M) connector (very flat) to OBD-2 / EOBD (SAE J1962F) female / female (very flat);
the switch disconnects the ground lines (pin 4 + 5), so devices can remain connected without consuming electricity;
Cable length about 0.6 meters / 60cm / 0.60 m
Cable thickness approx. 1mm (0.1cm)
all 16 pins are occupied and can be used, connection 1: 1;
Standard compliant version with center bar for type A (car / 12V);
industrially manufactured cable in good quality without shielding;
The extremely flat OBD-2 connector (according to SAE J1962 / ISO 15031-3 standard with leading mass on the pins 4 and 5) protrudes only about 10mm (1cm) out of the OBD socket in the car. Use is therefore also possible in environments where other extensions or plugs are bad to use and possibly prevent the closing of an existing cover.
the switch disconnects the ground lines (pin 4 + 5), so devices can remain connected without consuming electricity;
Cable length about 0.6 meters / 60cm / 0.60 m
Cable thickness approx. 1mm (0.1cm)
all 16 pins are occupied and can be used, connection 1: 1;
Standard compliant version with center bar for type A (car / 12V);
industrially manufactured cable in good quality without shielding;
The extremely flat OBD-2 connector (according to SAE J1962 / ISO 15031-3 standard with leading mass on the pins 4 and 5) protrudes only about 10mm (1cm) out of the OBD socket in the car. Use is therefore also possible in environments where other extensions or plugs are bad to use and possibly prevent the closing of an existing cover.
 |
|
|
 |
|
|
 |
|
|
 |