OBD Accessories

OBD-2 Extension Cable M-2 / 2.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
38060-C2
OBD-2 Extension Cable M-2 / 2.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
OBD-2 / EOBD (SAE J1962M Type B) Male to OBD-2 / EOBD (SAE J1962F) socket; Total length about 2.0m (200cm); AWG 24; Aluminum Foil + Braid Screen Shielding and twisted pairs for signal lines (J1850 BUS+/BUS- and CAN High/Low lines); for 24V Vehicles;
26,95 €
13,48 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38060-C2

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD-2 Cable Y-Cable F - HiQ - (J1962 M-2xF) // Y-Splitter
32063
OBD-2 Cable Y-Cable F - HiQ - (J1962 M-2xF) // Y-Splitter
OBD-2 / EOBD (SAE J1962M) Male to TWO OBD-2 / EOBD (SAE J1962F) couplings; OBD2Cables.com Part Number: 145802; Total length about 320mm (32cm); AWG 26; compatible with the Atek Actia TGD3501706, CAT DLC J1962Y adapter, part number 12450111; Aluminum foil shielded cable; Twisted pair for signal lines (J1850 + / BUS and CAN-High / Low); very good EMI immunity to interference;
26,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32063

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A1 - 12V / 600mA
30067
Power-Supply for OBD2 - Interfaces - Typ A1 - 12V / 600mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 600 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
28,49 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A2 - 12V / 1000mA
30067-1000
Power-Supply for OBD2 - Interfaces - Typ A2 - 12V / 1000mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 1000 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
28,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067-1000

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD-2 Extension Cable M-3 / 3.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
38060-C3
OBD-2 Extension Cable M-3 / 3.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
OBD-2 / EOBD (SAE J1962M Type B) Male to OBD-2 / EOBD (SAE J1962F) socket; Total length about 3.0m (300cm); AWG 24; Aluminum Foil + Braid Screen Shielding and twisted pairs for signal lines (J1850 BUS+/BUS- and CAN High/Low lines); for 24V Vehicles;
29,95 €
9,98 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38060-C3

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD Socket Original Mercedes (A 202 545 01 26)
32053
OBD Socket Original Mercedes (A 202 545 01 26)
Complete plug kit (diagnosis box) in individual parts for manufacturing own interwirings or change of defective parts; Original Mercedes Benz (DaimlerChrysler) part no. is A2025450126.
29,95 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32053

Shippingtime: SOLD OUT SOLD OUT

OBD-2 Cable-Connection Special A - (J1962M to CPC9F)
30026
OBD-2 Cable-Connection Special A - (J1962M to CPC9F)
Male OBD2 (SAE J1962M) to CPC9F female; OBD2Cables.com Part Number: 142801; Cable length about 7.5 m; RoHS Compliant; Heavy-duty materials and quality craftsmanship give the cable superior flexibility and durability Aluminum foil shielding and twisted pairs for signal lines give the cable exceptional EMI noise immunity.
29,99 €
4,00 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30026

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D1 - 12V / 600mA
30066-600
Power-Supply for OBD2 - Interfaces - Typ D1 - 12V / 600mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 600 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
29,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-600

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD BreakOut-Box F / Monitor-Box - OBD-2 (SAE J1962 Typ A)
32079
OBD BreakOut-Box F / Monitor-Box - OBD-2 (SAE J1962 Typ A)
Male OBD-2/EOBD (SAE J1962 type A) AND female OBD-2/EOBD (SAE J1962 type A) to Breakout Box, cable length about 0.5 m. Breakout function: With this box they have the possibility of accessing over the banana sockets by means of banana plugs on the pins of the OBD-II socket. Monitor function: The data between the OBD-II socket and an attached Messequipement (tester) can be along-logged over the banana sockets.
29,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32079

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D2 - 12V / 1000mA
30066-1000
Power-Supply for OBD2 - Interfaces - Typ D2 - 12V / 1000mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 1000 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
31,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-1000

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ A3 - 12V / 1500mA
30067-1500
Power-Supply for OBD2 - Interfaces - Typ A3 - 12V / 1500mA
Power-Supply for using OBD-2 interfaces without a connected car. 12 volts, 1500 mA with female OBD-2 connector (J1962F) to connect all known interfaces. Supplies the power usually coming from the car.
32,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30067-1500

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
Power-Supply for OBD2 - Interfaces - Typ D3 - 12V / 1500mA
30066-1500
Power-Supply for OBD2 - Interfaces - Typ D3 - 12V / 1500mA
Power supply for use of OBD-2 interfaces without a connected vehicle. 12 Volt, 1500 mA with female OBD-2 jack (J1962F) in a right-angled, ergonomic housing. The power supply takes over the other coming from the vehicle power supply.
32,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 30066-1500

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD-2 Connector 06 - (J1962 Type B, 24V male) - Made in Germany
34004
OBD-2 Connector 06 - (J1962 Type B, 24V male) - Made in Germany
Plug kit according to J1962 (OBD-2 / EOBD) type B (24V) - with 16 pins consisting of pin carrier, two housing shells, locking and kink protection. The cable strain relief is generated by the housing shells. This connector is approved by both Mercedes-Benz and Bosch. Quality Made in Germany!
Sliding scale prices:
1-49 units per 34,95 €
50-99 units per 32,99 €
100-199 units per 31,99 €
ab 200 units per 28,99 €
34,95 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 34004

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD-2 Extension Cable C-3 / 4.5m - HiQ - (J1962 M-F)
32104
OBD-2 Extension Cable C-3 / 4.5m - HiQ - (J1962 M-F)
OBD-2 / EOBD (SAE J1962M) Male to OBD-2 / EOBD (SAE J1962F) socket; Total length about 4500mm (450cm); AWG 24; Aluminum foil shielded cable; Twisted pair for signal lines (J1850 + / BUS and CAN-High / Low); very good EMI immunity to interference;
our standard price 34,95 €
your price 29,95 €
6,66 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32104

Shippingtime: SOLD OUT SOLD OUT

OBD-2 Extension Cable M-5 / 5.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
38060-C5
OBD-2 Extension Cable M-5 / 5.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
OBD-2 / EOBD (SAE J1962M Type B) Male to OBD-2 / EOBD (SAE J1962F) socket; Total length about 5.0m (500cm); AWG 24; Aluminum Foil + Braid Screen Shielding and twisted pairs for signal lines (J1850 BUS+/BUS- and CAN High/Low lines); for 24V Vehicles;
34,95 €
6,99 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38060-C5

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD-2 Extension Cable M-10 / 10.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
38060-C10
OBD-2 Extension Cable M-10 / 10.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
OBD-2 / EOBD (SAE J1962M Type B) Male to OBD-2 / EOBD (SAE J1962F) socket; Total length about 10.0m (1000cm); AWG 24; Aluminum Foil + Braid Screen Shielding and twisted pairs for signal lines (J1850 BUS+/BUS- and CAN High/Low lines); for 24V Vehicles;
49,95 €
5,00 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38060-C10

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD BreakOut-Box C - Mercedes Benz 38Pin
32028
OBD BreakOut-Box C - Mercedes Benz 38Pin
High quality OBD (Mercedes 38-pin) to Breakout Box, cable length about 1.5 m. Special breakout box which enables you to access all pins on a 38 pin Benz diagnostic connector via 4mm female banana sockets. Since Benz use a lot of different K-lines for it's different systems like engine ECU, ABS, etc. this is needed for most scantools if you want to access all the systems just by pluging the K-line into the right socket of the system.
49,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 32028

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD BreakOut-Box G / Monitor-Box - OBD-2 (SAE J1962 Typ A + B)
38074
OBD BreakOut-Box G / Monitor-Box - OBD-2 (SAE J1962 Typ A + B)
Male OBD-2/EOBD (SAE J1962 type A+B) AND female OBD-2/EOBD (SAE J1962) to Breakout Box, cable length about 0.5 m. Breakout function: With this box they have the possibility of accessing over the banana sockets by means of banana plugs on the pins of the OBD-II socket. Monitor function: The data between the OBD-II socket and an attached Messequipement (tester) can be along-logged over the banana sockets.
49,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38074

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD-2 Extension Cable M-15 / 15.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
38060-C15
OBD-2 Extension Cable M-15 / 15.0m - HiQ Plus - (J1962M Typ B - F) // for 24V
OBD-2 / EOBD (SAE J1962M Type B) Male to OBD-2 / EOBD (SAE J1962F) socket; Total length about 15.0m (1500cm); AWG 24; Aluminum Foil + Braid Screen Shielding and twisted pairs for signal lines (J1850 BUS+/BUS- and CAN High/Low lines); for 24V Vehicles;
59,95 €
4,00 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 38060-C15

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
OBD2-Simulator for J1939 (mOByDic 1700)
36020
OBD2-Simulator for J1939 (mOByDic 1700)
The SAE J1939 multiple ECU simulator provides a professional OBD development platform which allow the user to test the OBD functionality on the table. Simulates 3 differnt ECUs. reading VIN and suspended DTC is possible. Using 5 potensiometer, 5 live data can be changed and some fixed PID values are provided. Pressing DTC bouton the trouble codes are generated and the MIL LED is ON. Service 4 commands clear the DTCs and the MIL LED.
117,81 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 36020

Shippingtime: SOLD OUT SOLD OUT

OBD-2 Cable-Connection Special B - (J1962M to 5x D-Sub CAN)
39999-018-01
OBD-2 Cable-Connection Special B - (J1962M to 5x D-Sub CAN)
OBD-2 / EOBD (SAE J1962M) male (straight) to 5x D-Sub 9pin (female); Cable length about 3.0m; Cables: HS1-CAN, HS2-CAN, HS3-CAN, HS4-CAN, MS1-CAN
123,99 €
41,33 € / m
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 39999-018-01

Shippingtime: ca. 10-14 Work Days (ordered) ca. 10-14 Work Days (ordered)

OBD Adapter Cable ISO 7638 ABS/EBS (Delphi Trailer Diag.)
33141
OBD Adapter Cable ISO 7638 ABS/EBS (Delphi Trailer Diag.)
ISO 7638 7 pin (EBS/ABS) Adapter - a special cable adapter to connect Texas, Autel, Launch, Bosch and other truck scanners that support K-Line, Can, Can 5V etc.
129,99 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 33141

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
DIAMEX OBD Simulator - The classic OBD2 simulator
37036
DIAMEX OBD Simulator - The classic OBD2 simulator
EOBD simulator, specially developed for hardware simulation of the OBD2 diagnostic interface. Provides two ECU's. Three potentiometers for changing the simulated values. USB interface for configuration via PC. High-quality, compact and stable plastic housing, noble appearance, indestructible laser marking.
349,00 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 37036

Shippingtime: ca. 2-4 workdays (on stock) ca. 2-4 workdays (on stock)
(abroad may vary)
DIAMEX OBD Simulator DX-M - the simulator for professionals
37043
DIAMEX OBD Simulator DX-M - the simulator for professionals
Professional EOBD / OBD-2 simulator "Simulator DX-M", the new generation of Diamex OBD2 simulators. One of the highlights of the Simulator DX-M is the power supply only via the USB port. If, for example, there is no socket within reach at the exhibition stand, a power bank is sufficient to supply the simulator and the connected diagnostic interface with power.
999,00 €
 
incl. 19% tax excl. Shipping costs

Artikel-Nummer: 37043

Shippingtime: Currently not available Currently not available

Show 129 to 152 (from a total of 152 products)